STP Bituminous Products

Approx. Rs 145 / Square MeterGet Latest Price

• PipeWrap - BT is a hot applied bituminous tape for corrosion protection conforming to IS: 10221, Appendix B. Specially formulated corrosion resistant bitumen compound provides high softening point, high penetration and high resistance to ageing. PipeWrap BT comprises of high tensile strength thermo-fusible HMHDPE film on both the sides.
• 2 mm PipeWrap - BT is five layer without fiber glass inner core, whereas, 3 / 4 mm thick PipeWrap - BT is seven layer tape with two inner cores; top core is of tough 45 gsm fiber glass and the bottom core is of 15 micron high tensile strength HMHDPE.

• Coating material for drinking water pipelines, fire fighting pipelines, raw water pipelines in thermal plants etc.
• Applied on buried and immersed pipes, fittings and appurtenances to protect them from high corrosive environment.

• Coating material for drinking water pipelines, fire fighting pipelines, raw water pipelines in thermal plants etc.
• Applied on buried and immersed pipes, fittings and appurtenances to protect them from high corrosive environment

Approx. Rs 1,250 / RollGet Latest Price

• ShaliPlus is recommended for waterproofing of roof-tops, basements, terrace gardens, reservoirs, corrugated sheets and sunken slabs.
• ShaliPlus AL provides aluminum finish on the top to provide UV resistance and hence may be used for waterproofing for non trafficable roof.

• Good elongation to absorb all structural movements
• High softening point & high penetration.
• Dimensional stability with pliability to adopt to all contours.
• Flexibility at very low temperature.
• Practically no ageing.
• Aluminium topping protects membrane against UV rays, in case of ShaliPlus AL

Approx. Rs 34 / KgGet Latest Price

Approx. Rs 2,000 / BarrelGet Latest Price

• Tar Plastic is a cold applied bituminous caulking compound with mineral fillers in a volatilesolvent to retain its plasticity. It is available in a putty form. TarPlastic remains plastic for aconsiderable length of time. The skin and interior harden to some extent after application. 

• It is ideal for use in situation where certain degree of expansion, contraction and vibration isexpected, like around J Hooks used for fixing Asbestos / GI sheets. It can also be used forcaulking various types of roofs and masonry walls, including
• Fully plugging gaps in tiles caused by sagging of battens or otherwise in case of tiledroofs.
• Filling minor cracks / gaps in terraced roofs or other locations.

• Cold applied and ready to use. Does not require specialised handling for application.
• Does not creep or flow when applied on vertical or sloping surfaces.
• Remains plastic for a considerable time and, therefore, can accommodate a good degree ofexpansion, contraction and vibration

Approx. Rs 1,000 / RollGet Latest Price

• TarFelt BH, is produced by saturating centre core of hessian with straight grade bitumen andcoated with specially formulated bituminous compound on both sides. Thereafter, Mica / sand isspread over bituminous surface to prevent inter layer sticking of felt during rolling and storage. 

• TarFelt BH is recommended for above ground waterproofing applications as per IS:1346/1991. They are suitable for application on various types of surfaces such as concrete, corrugatedasbestos / GI sheet, timber, all types of flat, slope and shell type structure. TarFelt BH is aproven waterproofing material for application on silos, grain godowns, warehouses, wagons,trams, buses, etc.

• Economical.
• Rot proof.
• Having excellent track record over six decades.
• Totally impermeable.
• Flexibility to adopt all types of contours.

Additional Information:

Approx. Rs 70 / LitreGet Latest Price

• Optimum finishing
• Non-toxicity
• Longer shelf life

Approx. Rs 2,700 / DrumGet Latest Price

• It may be used to stick insulation sheets on to concrete, timber, metal or other insulation sheets.
• It is particularly suitable for use in cold storage to ensure good adhesion to walls and ceilings and may
• also be used for sticking thermocole for insulation of refrigeration pipe work.
• Special grades of CPRX Compound™ are available for fixing tiles, linoleum, etc.

• Cold Adhesive, hence heating not required.
• Brushable and easy to apply.
• High bond strength.

Additional Information:

Approx. Rs 2,800 / ContainerGet Latest Price

• ShaliTex Primer is a solvent based bituminous primer that seals pores in surfaces such as concrete and improves the adhesion of bituminous materials that are to be applied to the substrate. It is suitable for brush or spray application. 

• Priming bituminous, concrete or masonry surfaces prior to laying membrane promotes bonding, whether self-adhesive or otherwise.
• Applied in canal lining joints and concrete floor joints prior to pouring of the bitumen sealing compound for bonding.

• Seal pores on surfaces such as concrete.
• Improves the adhesion of bituminous material that is to be applied to the substrate.

Additional Information: